Casio DT-X11M10E Quick Start Manual page 79

3. Choose DT-X11 in the Installed SDKs field and click > button.
Figure 9.4
4. Click Next > button while DT-X11 is kept being highlighted in the Selected SDKs field.
Figure 9.5
5. Choose Console Application for the Application type in the Application Settings menu, and
click Finish button.
6. In Solution Explorer, click DeviceApp.cpp and then add the source code below subsequent
to "#include <commctrl.h>".
#include <SystemLib.h>
#if !defined(_countof)
#define _countof(_Array) (sizeof(_Array) / sizeof(_Array[0]))
#endif
79