Setting The Tpi Cycles - Secure SCS317 User Instructions

Setting the TPI cycles

Pressing BACK at any time in this process will return you to
normal operating mode
Press ENTER twice
The current setting
will now flash
Press '-' or '+' to
adjust to the correct
setting for your
heating system.
(Please refer to
table below)
Oil Boilers
Gas Boilers
Not used
Electric Heating
This feature would normally be set by your installer
Press '-' or '+' until
Set Up appears on
the display
Press ENTER
Press ENTER
3 cycles per hour
6 cycles per hour
9 cycles per hour
12 cycles per hour
Press ENTER
Press '-' or '+' until
TPI Cycles per hour
appears on the
display
The unit will now
return to the Set Up
position, simply press
BACK to return to
normal operating
mode
17