Setting The Standby; To Exit Standby Mode - Secure SCS317 User Instructions

To copy the same programmes to other days of the week,
please follow the process below
When you have set
P6 the message 'To
Copy press ENTER'
will appear.
When complete press BACK
to return to normal operating
mode
To programme remaining
days please go to the start of
the process 'Setting the
PROGRAMME'

Setting the STANDBY

Press ENTER Twice
After a short period Standby
Enabled will disappear from
the display
To exit STANDBY mode, press ENTER TWICE
Press ENTER
Press '-' or '+' until
STANDBY
appears on the
display
The next
sequential day
will now flash.
Press '-' or '+' to select the
days you wish to copy the
set programmes. Pressing
ENTER after each day to
confirm
Press ENTER
The words STANDBY and
Standby Enabled will appear
on the display
9