Permanent Override - Secure SCS317 User Instructions

PERMANENT OVERRIDE

Press '-' or '+' to
adjust temperature
Press ENTER
Message will
appear briefly
confirming
'Temperature set
until manual
release'
In the 'HOLD' position the temperature can be overridden by
pressing either the '-' or '+' buttons. This will then become the
new 'HOLD' temperature
PERMANENT OVERRIDE – CANCELLATION
Press BACK
New temperature
setting will be
shown on the
display
Press the '+'
repeatedly until
HOLD appears in
the display
Press ENTER
Press ENTER
The hours of
the UNTIL time
will flash
5