Main Menu - Secure SCS317 User Instructions

MAIN MENU

To access the MAIN MENU take the following steps:
Press ENTER twice
MENU OPTIONS
Programme
Standby
Holiday
Time / Date
Set Up
Press '-' or '+' to
toggle between the
menu options
This allows the user to adjust the different
time and temperature settings from the
factory default settings shown in the table on
page 6.
Up to six different temperature levels can be
set in any 24 hour period
This puts the SCS317 into Frost protection or
Standby condition and allows the heating to
be permanently switched off but will activate
and switch the heating on if the temperature
in the house falls below the standby
temperature set.
All programme settings are overridden and
the unit will not return to normal operation
until the standby period has ended by
pressing the ENTER button.
This puts the SCS317 into a temporary
standby mode with a start and end date
which can be set to coincide with a holiday
period. At the end of the set period the
SCS317 will resume normal operation
The SCS317 has a built in clock and
calendar. This will require setting on initial
installation. If this has not been set on
installation please go to Setting the TIME and
DATE section on page 12 before continuing
Enables the programming of various options
outlined in the SET UP MENU on page 13 of
these instructions – These should be set on
installation.
7