Setting the TAMPER SETTING
This setting allows the unit to be locked to the programmes set
and can only be reactivated by entering the pin code.
None of the buttons will operate until the security code is entered
Pressing BACK at any time in this process will return you to
normal operating mode
Press ENTER twice
The first digit of
FOUR will now flash
Press '-' or '+' to
adjust to a
number of your
choice (0-9),
then press
ENTER
Press '-' or '+' until
Set Up appears on
the display
Press ENTER
Repeat the
previous step
for the second,
third and fourth
digits
Press ENTER
Press '-' or '+' until
Tamper Setting
appears on the
display
PLEASE MAKE A NOTE
OF THIS CODE AND
KEEP IN A SAFE
PLACE. THIS WILL BE
REQUIRED TO MAKE
ANY CHANGES IN THE
FUTURE
A message will
appear briefly
confirming 'Tamper
code set when this
message clears'
19