Setting The Temperature; Additional Temperature Settings; Temperature Set Back Feature - Secure radbot 1 Instruction Manual

Setting the temperature

Additional temperature settings

Temperature set back
Radbot 1 saves energy by setting back the temperature in a room when it detects the room is
not being used. In works to save energy. As the dial is turned towards the cold end of the scale, the
maximum allowed energy-saving temperature setback will be increased, and vice versa.
Sets the room temperature
to the maximum allowable
setting of 24°C
Rotate the control wheel to set the
temperature.
The temperature dial has five settings to
adjust the temperature according to your
comfort. The mid point is set at 19°C on
scale 3.
Rotate the dial from 1 to 5 in
counterclockwise direction to increase
the temperature. Rotate it from 5 to 1
in clockwise direction to decrease the
temperature.
Each click on the dial changes the set point
by 1°C, each full number by 2°C.
Activates the frost
protection mode
and sets the
temperature to 6°C
11