Activating The Back-Lit Display; General Information - Secure SCS317 User Instructions

DISPLAY
Actual Room Temperature
Set Temperature
Until (time)
Then (temp)
Day of the week
Time of day
Setting Buttons
No Radio waves
Solid Radio Antenna

ACTIVATING THE BACK-LIT DISPLAY

Press any button to illuminate the display. This will remain illuminated for
10 seconds

GENERAL INFORMATION

During programming please note that the display will return to its normal
operating screen if the last button press exceeds 10 seconds.
This is the actual room temperature
measured by the SCS317
This is the temperature that the SCS317
will allow the room to reach. The
temperature range can be set between
5°C and 30°C
When the temperature shown in the
display is achieved the SCS317 will
switch the heating OFF.
If the temperature in the room falls below
the setting the SCS317 will switch the
heating ON.
This is the time that the next
temperature setting is due to operate
This is the temperature setting that is
due to operate next
It is important that the correct day of the
week shows in the display
This is the current time of day
Press any button to illuminate the
display.
The message 'To override press -/+ To
see menu press ENTER' will appear
Wireless connection not set up
Z-Wave communication present
– Flashing Radio Antenna – Temporary
loss of Z-Wave communication
3