INSTALLATION
Installation of junction (A)
Installation of junction (A)
(A)
(B)
1
2
3
Using band (A) and hook (C) included
with SM-EW90, attach to stem (B).
(C)
Adjust according to the length of the
band and the thickness of the stem.
Hook the band on the hook and wind it
around the stem.
Pull on and secure the band.
(D)
Slide junction (A) (D) of SM-EW90 into
the rail section of the hook to install it.
(a)
(a)
Finished image
20
(A)
Band
(B)
Stem
(C)
Hook
(D)
SM-EW90 Junction (A)
Removal
Pull up the release lever to slide junction (A)
in the direction of the arrow for removal.
Forcibly pulling up the release lever may
break the lever.
Release lever