Charging The Battery; Names Of Parts - Shimano XTR Di2 Dealer's Manual

CHARGING THE BATTERY

Names of parts

CHARGING THE BATTERY
Use the specified combination of lithium ion batteries, chargers, and linkage devices.
Any other combinations may cause explosion or fire.
Fully understand the precautions for use provided at the beginning of the Dealer's Manual before using the products.
„ Names of parts
External (SM-BCR1 / SM-BTR1)
Battery charger (SM-BCR1)
<
(B)
(E)
Special battery (SM-BTR1)
<
>
(F)
>
(A)
(A)
(D)
(C)
71
(A)
Electrical contacts
(If these are modified or damaged,
problems with operation will occur.
Be very careful when handling
them.)
(B)
Power cable connector
(C)
CHARGE indicator
(This lights up while charging is in
progress. )
(D)
ERROR indicator
(This flashes when there is an
error.)
(E)
Power cord
(Insert into the connector.
* Insert as far as it will go.)
(F)
Charger cord < Sold separately >
This charger is a special charger for use in
charging Shimano lithium ion batteries
(SM-BTR1).
(A)
Electrical contacts
(If these are modified or damaged,
problems with operation will occur.
Be very careful when handling
them.)
The battery is a lithium ion battery.
Use the special battery charger (SM-BCR1) to
recharge the battery.