Installation Of The Battery - Shimano XTR Di2 Dealer's Manual

INSTALLATION

Installation of the battery

„ Installation of the battery
In the case of an external battery (SM-BTR1)
< Installation of the battery mount >
1
2
To be continued on next page
Set the battery mount into position.
Use the bottle cage fixing bolt to
provisionally install the battery mount to
the bottom of the bottle cage.
Use the included M4 bolts to secure the
short type.
For the long type, secure it with the bolts
supplied with the frame or the bottle
cage.
Refer to the Service Instructions for the
bottle cage for details on the tightening
torques.
Leave a space of 108 mm or more at the
end of the battery mount.
Check that the battery can be inserted
and removed while the bottle cage is
installed.
a.
108 mm
32
Tightening torque
1.2 - 1.5 N·m
{11 - 13 in. lbs.}