Adjusting Rear Derailleur Friction - Shimano XTR Di2 Dealer's Manual

ADJUSTMENT

Adjusting rear derailleur friction

„ Adjusting rear derailleur friction
The friction amount can be adjusted as desired. It may also be adjusted if the friction changes during use.
Friction adjustment
1
Move the lever switch to the ON position.
2
(A)
3
(D)
4
To be continued on next page
Remove the plate unit cap (A) by hand as
shown in the illustration.
Turn the friction adjustment bolt (B) with
an Allen key (C) to adjust the friction.
(B)
(C)
Insert an Allen key or Hexalobular
wrench into the left plate (D) and check
the friction torque.
68
(A)
Plate unit cap
(B)
Friction adjustment bolt
(C)
2 mm Allen key
(D)
Left plate
Friction torque
3.5 - 5.4 N·m
{31 - 47 in. lbs.}
NOTE
Check the shape of the hole and use a tool
that fits into the hole in the left plate.
Tool specifications:
• 5 mm Allen key
• Hexalobular #30