Replacing Parts - Rear Derailleur - Shimano XTR Di2 Dealer's Manual

MAINTENANCE

Replacing parts - rear derailleur

„ Replacing parts - rear derailleur
Replacement of the plate and the p tension spring
< Removal >
(a)
1
2
(B)
To be continued on next page
Make sure that the lever switch is in the
OFF position.
(b)
If the lever switch is in the ON position,
(A)
be sure to move it to the OFF position.
(a)
ON
(b)
OFF
Set the rear derailleur to the lowest gear.
Remove the plate stopper pin (B) with a
screwdriver.
84
(A)
Friction unit
NOTE
If operating the lever switch while the plate
unit cover is removed, press the friction unit
with your finger so that it does not fly out.
(B)
Plate stopper pin
Tightening torque
1 N·m
{9 in. lbs.}