How To Operate; Basic Operations Of The Shifting Switch - Shimano XTR Di2 Dealer's Manual

How to operate

Basic operations of the shifting switch

How to operate
„ Basic operations of the shifting switch
Y X
X
Y
Factory default setting of the shifting
switch:
The shifting switch is set at default to
shift the gear in the directions shown in
the illustration.
Y
X
X Y
43
NOTE
Check the firmware version of the system
before use.
Check the version compatibility of the
firmware according to the "Connection and
communication with the PC" section. If the
firmware is old, update it to the latest version.
You can configure the settings in E-tube
Project. For details, refer to "Connection and
communication with the PC"-"Settings
customizable in E-tube Project".