MAINTENANCE
Replacing rubber pad A
Replacing rubber pad A
Depending on the specifications, there are also models with no rubber pad A.
Removal
(X)
1
2
Remove rubber pad A (X).
Insert a small slotted screwdriver into the
gap as shown in the illustration.
Lift rubber pad A to remove it.
89
(X)
Rubber pad A
NOTE
•
When removing rubber pad A, do not
apply excessive force. It may cause damage
to the chain guide or unexpected injuries.
•
Do not reuse rubber pads that have been
removed. The rubber pad may become
loose due to deformation etc.