[ 4 ] System Environment Setting
Selecting "4: SET SYSTEM" on the SYSTEM MENU calls up the
screen shown at left.
[1] EXECUTE PROGRAM: Sets an execution program to be run
[2] DISPLAY:
[3] DATE/TIME:
[4] BARCODE:
[5] COMMUNICATION:
[6] KEY:
[7] RESUME:
[8] DEFRAG:
Select a desired item by using the numerical keys or F5 and F6 keys,
and the selected item becomes highlighted. Then press the ENT key.
Press the C key to return to the SYSTEM MENU.
Chapter 2 Getting Started the BHT and System Mode
when the power is turned on.
Sets the message version (English or
Japanese).
Sets the calendar clock (date and time).
Sets the special barcode scanning
parameters
inverted label reading and the decoding
level) and the minimum number of digits
to be read for bar codes (ITF, STF and
Codabar).
Sets the communications environments
(interface port and communications
parameters).
Defines the functions of the shift key and
magic keys.
Sets the resume function.
Defragments the drive.
51
(the
black-and-white