Bht Turning-Off Notes; 1 ] "Shutdown In Progress" Message; 2 ] If The Bht Is Shut Down Abnormally - Denso BTH-300BW User Manual

Chapter 2 Getting Started the BHT and System Mode

2.3.7 BHT Turning-off Notes

[ 1 ] "Shutdown in progress" message

When the BHT is turned off by pressing the PW key or by the auto power-off feature, it displays the
following message and starts preparation for shutdown.
When the above message is displayed, do not remove the battery cartridge.
If you do so and leave the BHT without a battery cartridge loaded for one hour or more, then the error
message "Contact your administrator. Note the error number. (20XX)" may appear when turning the
BHT on at the next time.

[ 2 ] If the BHT is shut down abnormally

If the BHT is shut down abnormally* and is left without a battery cartridge or with a discharged battery
cartridge loaded, then unsaved data may be lost.
(*"Normally shut down" refers to "turned off with the PW key or by the auto power-off feature.")
If the above problem has arisen, the following message will appear when you load a charged battery
cartridge and turn the BHT on.
(1) Press the 2 key while holding down the SF key. The screen will switch to the following:
31