Lifescan SureStepFlexx Operator's Manual page 88

7
Verify that the scanner was installed correctly.
Turn on the meter. The
on ID and data entry screens (see "Scanning a
Barcode" on page 10 for more information).
NOTE:
with your system administrator to make sure that
the meter's barcode scanner is enabled in DataLink
software. Also, check the battery bar for adequate
power. The
battery power is low.
76
SureStepFlexx Meter Operator's Guide
Example
SCAN button indicates scanner
module was successfully installed.
If the button does not appear, check
SCAN
button may not appear if
SCAN
SCAN
button appears