Lifescan SureStepFlexx Operator's Manual page 47

8
Check the white pad on the front of the test
strip and the confirmation dot on the back of
the test strip.
• If the white pad
becomes completely
saturated, you have
applied too much
blood for an accurate
result. Repeat the
application with a new
test strip.
• The confirmation dot
should be completely
blue. If white patches
or streaks are visible,
you have not applied
enough blood for an
accurate result. Repeat
the application with a
new test strip.
CAUTION:
test strip or you may get an inaccurate result.
If white patches or streaks continue to appear
after you have repeated the test and used a larger
volume of blood, call the LifeScan Healthcare
Professional Line at 1 800 524-7226.
Do not apply additional blood to the
Chapter 3: Patient Test
Right Wrong
FRONT
Right Wrong
BACK
35