Lifescan SureStepFlexx Operator's Manual page 34

4
Select the control test you
wish to run (for example,
High QC Test
Only the control level(s)
that are required by your
institution appear.
5
Enter your operator ID and
press
If the meter is equipped with
the optional barcode scanner,
you may scan the barcode on
your ID badge.
Operator ID required for all tests
If your ID appears at the operator ID screen,
press
not correct or does not appear, enter your ID.
6
Select the control solution
lot number from the list
displayed.
The last control lot selected
appears at the top of the list.
Use the arrow(s) to scroll
through the list, if necessary.
22
SureStepFlexx Meter Operator's Guide
).
.
Maintain ID for ___ min. after power off
to confirm it is correct. If the ID is