Manually enter IDs or lot numbers by pressing the
appropriate characters on the screen. Both alpha and
numeric characters are available for data entry.
When you press an alphanumeric key:
• the number displayed on the key is automatically
selected, and
• the letters or special characters displayed on the key
appear in the right column of the keypad. To select
a letter or special character, press the key in the
right column.
For example, to select W:
1. Press the 9 key.
[9 is selected and W, X, Y, Z appear to the
right]
2. Press the W key at the right.
[W replaces the 9]
1. Press 9 to select 9 and
display W, X, Y, Z to the
right.
Press
when you have completed the entire entry.
To delete the last character(s) entered, press
NOTE:
The meter automatically shuts off if left
inactive. The shut-off range is 1 to 4 minutes depending
on the stage of the testing procedure. Press the power
WXYZ
Chapter 1: Introduction
2. To select W, X, Y, or Z,
press the key at the
right.
DEL
.
9