Table of Contents
Advertisement
If the meter is equipped with the optional barcode
scanner, you may press
barcode on the test strip bottle label.
New reagent entry at workstation only
The meter may be set to allow you to enter new
reagent information. If the test strip lot number
does not appear in the list, press the
button and enter the test strip lot number,
control code, and control ranges.
CAUTION:
To obtain accurate results, you must enter
the correct test strip lot number (and code) for each
new test.
7
Run REP 1
Press
the test for the first
replicate of linearity
solution, level 1.
8
Apply the linearity solution
to the test strip.
• Gently shake the linearity solution vial.
• Touch a drop of linearity solution to the center
of the pink test square.
Entr Lot#
to perform
Chapter 5: Special Tests
and scan the
Entr Lot#
L i n e a r i t y 1 L e v e l
R u n
R E P 1
Next Level
53
Advertisement
Table of Contents
