Lifescan SureStepFlexx Operator's Manual page 71

7
Apply the unknown solution to the test strip.
• Touch the drop of solution to the center of the
pink test square.
If the white pad becomes completely saturated,
you have applied too much solution. Repeat the
application with a new test strip.
• Check the confirmation dot on the back of the
test strip to verify it has turned completely
blue, indicating an adequate amount of solution
was applied.
If white patches or streaks are visible, you have
not applied enough solution. Repeat the appli-
cation with a new test strip.
Chapter 5: Special Tests
59