Table of Contents
Advertisement
3.3 LAN
Use this screen to specify a private IP address for your router's LAN ports (LAN
IP panel), as well as a subnet mask for your LAN segment (DHCP Server panel).
Parameter
IP Address
IP Subnet Mask
802.1d Spanning
Tree
DHCP Server
Lease Time
Default
Description
192.168.2.1 This is the router's LAN port IP address (your
LAN clients' default gateway IP address).
Specify a subnet mask for your LAN segment.
Disabled
If this function is enabled, this router will use
the spanning tree protocol to prevent network
looping in the LAN ports.
Enabled
When enabled, the router will automatically
give your LAN clients an IP address. If the
DHCP is not enabled, you'll need to manually
set your LAN clients' IP addresses. Make sure
the LAN client is in the same subnet as this
router if you want the router to be your LAN
clients' default gateway.
When the DHCP is enabled, it temporarily
gives your LAN clients an IP address. From the
drop-down menu, you can specify the time
33
Advertisement
Table of Contents
