Table of Contents
Advertisement
Add MAC address
into the list
Remove MAC address
from the list
Click <Apply> at the bottom of the screen to save the above configurations. You
can now configure other sections or start using the router.
3.5 QoS
Quality of Service lets you classify Internet application traffic by source/
destination IP address and port number. You can assign a priority for each type
of application and reserve bandwidth for it. The packets of applications with
higher priority will always go first: Lower-priority applications will get bandwidth
after higher-priority applications get enough bandwidth. As a result, you enjoy a
better experience when using critical real-time services such as Internet phone
and video conferencing. All the applications not specified by you are classified as
rule name "Others." The rule with the smaller priority number has the higher
priority; the rule with the larger priority number has the lower priority. You can
adjust the priority of the rules by moving them up or down. Note: If the total
assigned bandwidth of higher-priority applications is larger than the maximum
bandwidth provided by the WAN port, the other applications will not get any
bandwidth.
Fill in the "MAC Address" and "Comment" fields for
the wireless station to be added and click "Add." This
wireless station will then be added into the Current
Access Control List that will display. Click "Clear" to
empty both "MAC Address" and "Comment" fields if
you need to re-enter text.
To remove a MAC address from the Current Access
Control List, select the MAC address(es) you want to
remove in the list and click "Delete Selected." To
remove all MAC addresses from the table, click
"Delete All." Click "Reset" to clear current selections.
46
Advertisement
Table of Contents
