Intellinet 524582 User Manual page 22

PPTP Gateway
Connection ID
BEZEQ-ISRAEL
Connection Type
Idle Time
Click "OK" when you have finished the configuration above. You have completed
the configuration for the PPTP connection. You can start using the router now.
If your LAN has a PPTP gateway, then enter that
PPTP gateway IP address here. If you do not have a
PPTP gateway, then enter the ISP's gateway IP
address above.
This is the ID given by ISP. This is optional.
Select this item if you are using the service provided
by Bezeq in Israel.
If you select "Continuous," the router will always
connect to the ISP. If the WAN line breaks down and
links again, the router will auto-reconnect to the ISP.
If you select "Connect On Demand," the router will
auto-connect to the ISP when someone wants to use
the Internet and keep connected until the WAN idle
timeout. The router will close the WAN connection if
the time period that no one is using the Internet
exceeds the Idle Time.
If you select "Manual," the router will connect to the
ISP only when you click "Connect" manually from the
Web user interface. The WAN connection will not
disconnected due to the idle timeout. If the WAN line
breaks down and latter links again, the router will not
auto-connect to the ISP.
You can specify an idle time threshold (minutes) for
the WAN port. This means if no packets have been
sent (no one is using the Internet) throughout this
specified period, then the router will automatically
disconnect the connection with your ISP.
Note: This "idle timeout" function may not work due to
abnormal activities of some network application
software, computer viruses or hacker attacks from the
Internet. For example, some software sends network
packets to the Internet in the background, even when
you are not using the Internet. Turn off your computer
when you are not using it. This function also may not
work with some ISPs. Make sure this function can
work properly when you use this function the first
time, especially if your ISP charges you by time used.
22