Table of Contents
Advertisement
RIP Config Table
When you finish, click "Apply Changes." You'll see the following message
displayed on Web browser.
Click "Continue" to save the settings made and go back to the Web management
interface; click "Apply" to save the settings made and restart the router so the
settings will take effect after it reboots.
5.2.3 LAN
This screen is used to configure the LAN interface of this router. You can set IP
address, subnet mask and IGMP Snooping.
The RIP you have configured will be listed in the table. If
you want to delete some settings, select the settings and
click "Delete Selected."
41
Advertisement
Table of Contents
