Table of Contents
Advertisement
Access Control Add PC:
Parameter
Client PC Description
Client PC IP Addresses
Client PC Service
Protocol
Description
Enter a description for this client PC rule, if desired.
Enter the IP address range you want to apply to this
Access Control rule. This is the user's IP address(es)
that you want to set up an Access Control rule for.
Note: You need to give your LAN PC clients a fixed/
static IP address for the Access Control rule to work
properly.
You can block clients from accessing some Internet
services by checking those you want to block.
Select "UDP," "TCP" or "Both."
60
Advertisement
Table of Contents
