Intellinet 524582 User Manual page 13

Login
Once you have configured your PCs to obtain an IP address automatically, the
Wireless G VPN Router's DHCP server will automatically give your LAN clients
an IP address. By default, the DHCP server is enabled to do this. To see if you
have obtained an IP address, see the Appendix near the back of this manual.
NOTE: As stated in the procedures above, make sure that the Wireless G VPN
Router's DHCP server is the only DHCP server available on your LAN. If there is
another DHCP on your network, you'll need to switch one of the DHCP servers
off. (To disable the Wireless G VPN Router's DHCP server, see Section 3.3.)
With your IP address(es) obtained from your router, follow these three steps:
1. Enter the default IP address 192.168.2.1 (the router's IP address) into your
PC's Web browser and press <Enter>.
2. When the login screen displays, fill in the "User Name" and "Password" fields,
then click "OK" to log in.
NOTE: By default, the username is "admin" and the password is "1234." For
security reasons, it's recommended that you change the password as soon as
possible (see Section 3.1.2).
3. When the HOME page screen displays (below), click "Quick Setup" on the
left-hand menu bar to go directly to the Quick Setup Wizard, which will show
you how to start using the Wireless G VPN Router as on Internet access
device only. Otherwise, you can click one of the other three primary menu
options — General Setup, Status Information and Tools — and proceed with
more detailed settings and network configurations.
13