Table of Contents
Advertisement
3.2 WAN
Use the WAN Settings screen if you have already configured the Quick Setup
Wizard section and you would like to change your Internet connection type:
Dynamic IP, Static IP Address, PPPoE, PPTP, L2TP, Telstra BigPond, DNS and
DDNS. Once you've made a selection, click "More Configuration" at the bottom of
the screen and proceed to the manual's corresponding sub-section.
3.2.1 Dynamic IP
Select if your ISP will automatically give you an IP address. Some ISPs may also
require that you fill in additional information, such as Host Name, Domain Name
and MAC address (see Section 2.2.2 for more details).
3.2.2 Static IP Address
Select if your ISP has given you a specific IP address for you to use. Your ISP
should provide all the information required in this section. (see Section 2.2.2 for
more details).
3.2.3 PPPoE (PPP over Ethernet)
Select if your ISP requires the PPPoE protocol to connect to the Internet. Your
ISP should provide all the information required in this section. (see Section 2.2.2
for more details).
3.2.4 PPTP
Select if your ISP requires the PPTP protocol to connect to the Internet. Your ISP
should provide all the information required in this section. (see Section 2.2.2 for
more details).
30
Advertisement
Table of Contents
