Table of Contents
Advertisement
Add Special Application
Remove Special
Application
Click "Apply" at the bottom of the screen to save the above configurations. You
can now configure other sections or start using the router.
Example of Special Applications:
If you need to run applications that require multiple connections, specify the port
(outbound) normally associated with that application in the "Trigger Port" field.
Then select the protocol type (TCP or UDP) and enter the public ports associated
with the trigger port to open them up for inbound traffic.
Trigger
Trigger
ID
Port
Type
1 28800
UDP
2 6112
UDP
In the example above, when a user triggers port 28800 (outbound) for MSN
Game Zone, the router will allow incoming packets for ports 2300-2400 and
47624 to be directed to that user. Note: Only one LAN client can use a particular
special application at a time.
require multiple connections. Select an application
from the list, select a location (1-10) in the "Copy to"
selection box, then click "Copy to." This automatically
lists the public ports required for this popular
application in the location (1-10) you've specified.
Fill in the "Trigger Port," "Trigger Type," "Public Port,"
"Public Type," "Public Port" and "Comment" fields of
the setting to be added and click "Add." This Special
Application setting will be added to the Current
Trigger-Port Table below. To change or correct an
entry before adding it, click "Clear" and re-enter.
To remove a Special Application setting from the
Current Trigger-Port Table, select the setting in the
table and click "Delete Selected." To remove all
settings from the table, click "Delete All." Click "Reset"
to clear your current selections.
Public Port
2300-2400, 47624
6112
54
Public Type Comment
TCP
MSN Game Zone
UDP
Battle.net
Advertisement
Table of Contents
