Table of Contents
Advertisement
Parameter
Host Address
Port
Enabled
Click "Apply" at the bottom of the screen to save the above configurations. You
can now configure other advanced sections or start using the router (with the
advanced settings in place).
Description
This is the IP address of the host on the Internet that
will have remote management/configuration access to
the router. This means if you're at home and your
home IP address has been designated the Remote
Management host IP address for this router (located
in your company office), then you're able to configure
this router from your home. If the Host Address is left
as 0.0.0.0, this means anyone can access the router's
Web-based configuration from a remote location,
provided they know the password. Click the "Enabled"
box to enable the Remote Management function.
Note: To access the Web-based management from a
remote site, you must enter the router's WAN IP
address (e.g., 10.0.0.1) into your Web browser,
followed by port number 8080 (e.g., 10.0.0.1:8080),
as shown below. You'll also need to know the
password set on the Password Setting screen in order
to access the router's Web-based management.
This is the port number of remote-management Web
interface.
Select to enable the Remote Management function.
29
Advertisement
Table of Contents
