Table of Contents
Advertisement
Parameter
Enable Virtual Server
Private IP
Private Port
Type
Public Port
Comment
Add Virtual Server
Description
Select to activate the function.
This is the LAN client/host IP address that the public
port number packet will be sent to. Note: You need to
give your LAN PC clients a fixed/static IP address for
the virtual server to work properly.
This is the port number (of the above private IP host)
that the public port number (below) will be changed to
when the packet enters your LAN (to the LAN Server/
Client IP).
Select the port number protocol type ("TCP," "UDP" or
"Both"). If unsure, leave it to the default "Both."
Enter the service (service/Internet application) port
number from the Internet that will be re-directed to the
above private IP address host in your LAN. Note: The
Virtual Server function will have priority over the DMZ
function if there is a conflict between the Virtual
Server and the DMZ settings.
Enter a description of this setting, if desired.
Fill in the "Private IP," "Private Port," "Type," "Public
Port" and "Comment" fields of the setting to be added
and click "Add." This Virtual Server setting will then be
51
Advertisement
Table of Contents
