Edit Connection:
Parameter
Enable Tunnel #
Connection Name
Local Site
Remote Site
Network Management
Advanced
Connection Type
Description
Select to enable this tunnel setting.
Enter a name for this connection. Note: Each of the
names needs to be unique (not duplicated).
Choose a type for the local site: single site or subnet.
Choose a type for the remote site: single site, subnet,
any address, any NAT Traversal address or L2TP
client. When you choose single site or subnet, you
need to specify the remote IP address.
Choose the key exchange method: "IKE" or "Manual."
Click for the advanced setting screen for IKE (below).
Select "Initiator" and the tunnel will automatically
connect at the boot time. Select "Responder" and the
67