Table of Contents
Advertisement
Parameter
Enable/Disable QoS
Add a QoS rule
into the table
Remove QoS rules
from the table
Edit a QoS rule
Adjust QoS rule priority
3.5.1 Edit QoS Rule
You can assign packet classification criteria by its local IP range, remote IP
range, traffic type, protocol, local port range and remote port range parameters.
The parameters that you leave blank will be ignored. The priority of this rule will
be applied to packets that match classification criteria of this rule. You can limit
bandwidth consumed by packets that match this rule or guarantee bandwidth
required by packets that match this rule.
Description
Select to activate the QoS function for the WAN port.
De-select to disable it.
Click "Add" to enter a form of the QoS rule. Click
"Apply" after filling out the form and the rule will be
added into the table.
To remove some QoS rules from the table, select the
QoS rules you want to remove and click "Delete
Selected." To remove all QoS rules from the table,
click "Delete All." Click "Reset" to clear current
selections.
Select the rule you want to edit and click "Edit." Then
enter the detail form of the QoS rule. Click "Apply"
after editing the form and the rule will be saved.
Select the rule and click "Move Up" to make its priority
Higher; select the rule and click "Move Down" to make
its priority lower.
47
Advertisement
Table of Contents
