Philips Sopho 2000 IPS User Manual page 795

E
CM49 When providing DAT, assign the answering
message for Wake Up to the DAT card or MP
built-in DAT.
CM41 Specify the duration of Wake Up call.
When providing the DAT, specify the duration
of message replay timer for Automatic Wake
Up.
CM42 Specify the number of Wake Up call attempts
before abandonment.
Specify the maximum number of Wake Up
calls can be set at the same time.
NOTE: This command is effective up to Se-
ries 3400 software.
F
DESCRIPTION
HOTEL SYSTEM PROGRAMMING
• Y=00
(1) 000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk
(2) 0C XX: Answering message on Automatic
XX : 00-63: Message No.
• Y=08
(1) 00-63: Tenant No.
(2) 00-63: Message No. assigned by CM49
• Y=0
(1) 23
(2) 02-14: 8-56 seconds
If no data is set, the default setting is 28-32
seconds.
• Y=0
(1) 52
(2) 01-99: 0-396 seconds
If no data is set, the default setting is 60-64
seconds.
(1) 03
(2) 01-05
NONE : 5 calls
(1) 04
(2) 01-32
NONE : 10 stations
– 777 –
AUTOMATIC WAKE UP
DATA
Card No. assigned by CM10/
CM14
Wake Up
Y=00
(4 second increments)
(4 second increments)
: 1 call-5 calls
: 1 station-32 stations
NWA-008845-001 Rev.5.0
32ch2001.fm
JUNE/01/2007