Philips Sopho 2000 IPS User Manual page 678

To provide SMDR for incoming calls, do the following programming:
J
CM13 Provide SMDR service for incoming calls to
the required stations.
CM35 Provide SMDR service for incoming calls to
the required trunk routes.
Provide SMDR output for abandoned incom-
ing calls to the required trunk routes.
[Series 3500 software required]
CM08 Specify whether the SMDR service is effective
only for incoming calls with Account Code or
not.
CM12 Assign the Charging Station Class number to
each station.
CM60 Assign the Charging Class number to
DESKCON.
CMDD04 To provide SMDR for incoming calls, do the
following programming.
K
DESCRIPTION
STATION MESSAGE DETAIL RECORDING (SMDR)
• Y=05
(1) X-XXXXXXXX: Station No.
(2) 0: To provide
• Y=49
(1) 00-63: Trunk Route No.
(2) 0: To provide
• Y=205
(1) 00-63: Trunk Route No.
(2) 0: To provide
(1) 426: SMDR for incoming call
(2) 0 : Effective for all incoming calls
1 : Effective only for incoming calls with
Account Code
• Y=45
(1) X-XXXXXXXX: Station No.
(2) 00-15 : Station Class No.
• Y=32
(1) 0-7: ATTCON No.
(2) 00-15 : Class No.
(1) XX 06: Send detail information of C.O./
XX: Service Class No. assigned by CM12
Y=45/CM60 Y=32
(2) 0 : Not sent
1 : To send
– 660 –
PROGRAMMING
DATA
Tie Line incoming calls to SMDR
terminal 0
NWA-008845-001 Rev.5.0
32ch1010.fm
JULY/01/2006