Philips Sopho 2000 IPS User Manual page 56

A
CM49 Assign the function for each Digital
Announcement Trunk card.
CM51 Assign the Digital Announcement Trunk as the
destination of the DID call on each tenant.
Assign the Digital Announcement Trunk as the
destination of the Tie Line call on each tenant.
CM20 To record, replay and delete a message, assign
the respective Digital Announcement Trunk
access code.
END
NOTE: Announcement Service can be used to provide a voice message when an incoming DID line/Tie
line call has been terminated to a station and encounters a busy or no answer condition. After
the voice message is given, normal call processing continues.
• This application can be programmed on a tenant basis.
• Only one (1) message of up to the following seconds can be recorded on an individual Digital
Announcement Trunk Circuit.
Built-in DAT on MP: 120 seconds
4DAT card: 120 seconds
DESCRIPTION
• Y=00
(1) 000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk No.
(2) 0D00: No Answer
0E00 : Busy
• Y=00 No Answer
• Y=03 Busy
(1) 00-63: Tenant No.
(2) EB000-EB127: Digital Announcement
• Y=01 No Answer
• Y=04 Busy
(1) 00-63: Tenant No.
(2) EB000-EB127: Digital Announcement
• Y=0-3 Number Plan Group 0-3
(1) X-XXXX: Access Code
(2) A100: Record
A101: Replay
A102: Delete
– 38 –
ANNOUNCEMENT SERVICE
DATA
(EB002-EB127)
Trunk No.
Trunk No.
NWA-008845-001 Rev.5.0
32ch1001.fm