Philips Sopho 2000 IPS User Manual page 159

A
CM08 Specify the setting method for Call Forward-
ing-Busy Line-Outside.
Allow or restrict the ability to set Call For-
warding-Busy Line for a station with Do Not
Disturb set.
Assign whether an extension can set a destina-
tion of Call Forwarding-Busy Line-Outside by
entering only a trunk access code.
Select the trunk route seized for Call Forward-
ing-Busy Line-Outside.
CM90 Assign Call Forwarding-Busy Line keys to the
term
D , as required.
CM65 Provide Call Forwarding feature with each
tenant as per incoming call type.
END
HARDWARE REQUIRED
term
D and DLC card if required
DESCRIPTION
(1) 222
(2) 0 : Setting when the station goes on hook/
when receiving Service Set Tone
(ORT time out)
1 : Setting when receiving Service Set
Tone (ORT time out)
(1) 240
(2) 0 : Allowed
1 : Restricted
(1) 386
(2) 0 : Restricted
1 : Allowed
(1) 600
(2) 0 : By calling party's tenant/terminating
trunk's tenant
1 : By Call Forwarding setting station's
tenant
• Y=00
(1) My Line No. +
(2) F0014: Call Forwarding-Busy Line Set/
For setting the same key as Call Forward-
ing-No Answer
(1) My Line No. +
(2) F0012: Call Forwarding-No Answer/Busy
• Y=23 Internal Call or ATT assisted Call
• Y=24 C.O. Incoming Call
• Y=25 Tie Line Incoming Call
(1) 00-63: Tenant No.
(2) 1 : Call Forwarding
– 141 –
CALL FORWARDING
CALL FORWARDING-BUSY LINE
DATA
,
+ Key No.
Cancel
,
+ Key No.
Line Set/Cancel
NWA-008845-001 Rev.5.0
32ch1003.fm