Philips Sopho 2000 IPS User Manual page 671

C
CMDD01 Set interface condition for PN-AP00-B/
PN-AP00-D with MRCA program RS port.
When you set CMDD01, the following initial
data is set to each port as the interface condi-
tion.
• Equipment Type: SMDR terminal 0
• Data Speed: 1200 bps
• Stop Bit Length: 2 bits
• Data Length: 8 bits
• Parity: No Parity
• Station Address (SA): 0
• Unit Address (UA): !
• Message Format: Former NEAX 2400 IMS
Format
NOTE: When you set interface condition to
two ports, change one of those ports
of equipment type to SMDR terminal
1 by CMDD10>X00.
D
DESCRIPTION
AP00 INITIAL
STATION MESSAGE DETAIL RECORDING (SMDR)
(1) 100 (Port 0)
101 (Port 1)
102 (Port 2)
103 (Port 3)
(2) 3: SMDR with NEAX 2400 IMS Format
NOTE
– 653 –
PROGRAMMING
DATA
NWA-008845-001 Rev.5.0
32ch1010.fm
JULY/01/2006