Philips Sopho 2000 IPS User Manual page 105

A
CM42 Specify the maximum number of digits for
Authorization Code with MP.
CM2A Assign the ID Code Development number for
Authorization Code.
Assign the ID Code for Authorization Code.
Assign the purpose of ID Code.
Assign the desired Trunk Restriction Class for
each ID Code Pattern number.
B
DESCRIPTION
(1) 11
(2) Maximum number of digits
01-16
NONE : 10 digits
• Y=A0
(1) 0: Authorization Code
(2) 0-9: ID Code Development No. 00-09
NOTE: CM2A Y=00-09 is determined by this
data.
• Y=00-09 ID Code Development No. 00-09
(1) X-XX...XX (Maximum16 digits):
ID Code for Authorization Code
(2) 0000-2999: ID Code Pattern No.
• Y=10
(1) 0000-2999: ID Code Pattern No.
(2) 0 : Validate the ID Code entered from sta-
tions and trunks
1 : Validate the ID Code entered from sta-
tions
3 : Invalidate the ID Code entered from
stations and trunks
• Y=11
(1) 0000-2999: ID Code Pattern No.
(2) 1 : Unrestricted (RCA)
2 : Non-Restricted-1 (RCB)
3 : Non-Restricted-2 (RCC)
4 : Semi-Restricted-1 (RCD)
5 : Semi-Restricted-2 (RCE)
6 : Restricted-1 (RCF)
7 : Restricted-2 (RCG)
8 : Fully-Restricted (RCH)
– 87 –
AUTHORIZATION CODE
DATA
: 1 digit-16 digits
NWA-008845-001 Rev.5.0
32ch1002.fm
JUNE/01/2007