Philips Sopho 2000 IPS User Manual page 569

• For Ring Down calls
START
CM35 Assign the indication of reason why the calling
number is not informed from network to trunk
route.
Assign whether the call terminating method is
specified for incoming call with no CLI.
NOTE:
Assign the call terminating method
by CM35 Y=255/257 when this
command is set to 0/1.
Assign the specification of the call terminating
method for incoming call with no CLI.
A
DESCRIPTION
• Y=133
(1) 00-63: Trunk Route No.
(2) 0: To indicate
• Y=254 (For Day Mode)
• Y=256 (For Night Mode/Mode A/Mode B)
(1) 00-63: Trunk Route No.
(2) 0 : Specified when reason of the incom-
ing call with no CLI is "privacy"
1 : Specified for all incoming call with no
CLI
3 : Not specified
• Y=255 (For Day Mode)
• Y=257 (For Night Mode/Mode A/Mode B)
(1) 00-63: Trunk Route No.
(2) 0 : To transfer to the DAT/another station/
Attendant console (assigned by CM51
Y=33)
1 : To reject the call termination
2 : To terminate the D
LED indication (assigned by CM35
Y=258)
3 : To terminate as usual
– 551 –
NO CID CALL ROUTING
DATA
term
with unusual
NWA-008845-001 Rev.5.0
32ch1009.fm
DECEMBER/02/2005