Philips Sopho 2000 IPS User Manual page 262

D
CM74 Assign the number to be dialed to each Memo-
ry Slot number, if required. The numbers to be
called are usually set from individual stations
by their station users.
Assign the Station Name to be displayed to
each Memory Slot number, by character codes
or character.
E
DESCRIPTION
CONSECUTIVE SPEED DIALING
• Y=0
(1) X YY Z
X : 0-9: 1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
(2) Stored No.:
Outgoing Call Access Code (Maximum 4
digits) +
digits)
To set a pause into the Stored No., enter
"C" (Fixed Pause=1.5 seconds) or
"D" (Programmable Pause specified by
CM41 Y=0>38) after desired digits.
NONE : No data
• Y=1
(1) X YY Z
X : 0-9: 1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
(2) XX...XX: Station Name Character Code
NONE : No data
See APPENDIX
Page B2
• Y=2
(1) X YY Z
X : 0-9: 1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
(2) XX...XX: Station Name Character
NONE : No data
– 244 –
DATA
,
+ Stored No. (Maximum 26
(Maximum 32 digits, 16 charac-
ters)
B:Character Code
(Maximum 16 characters)
NWA-008845-001 Rev.5.0
JANUARY/20/2006
Table.
32ch1004.fm