Philips Sopho 2000 IPS User Manual page 680

L
CM08 Specify whether the ANI/Caller ID is sent to
SMDR.
NOTE 1:
NOTE 2:
M
To provide SMDR for tandem calls, do the following programming:
M
CM08 Provide the system with SMDR service for
tandem calls.
CMDD00 Specify the direction for sending detail infor-
mation on tandem calls.
Specify whether account code is sent in the
Authorization Code Area of Call Record.
N
DESCRIPTION
When providing incoming calls with
ANI, assign this data in addition to
the programming for AUTOMATIC
NUMBER IDENTIFICATION
(ANI). Page 120
When this data is available to 1,
SMDR service for incoming calls is
not provided even if CM13 Y=05 is
0 (To provide).
DESCRIPTION
STATION MESSAGE DETAIL RECORDING (SMDR)
(1) 463: ANI/Caller ID to SMDR
(2) 0 : To send
1 : Not sent
(1) 040
(2) 0: Available
(1) 0: Send detail information of tandem call to
SMDR terminal 0
(2) 0 : Not sent
1 : To send
(1) 1: Send detail information of tandem call to
SMDR terminal 1
(2) 0 : Not sent
1 : To send
(1) 160
(2) 0 : Not sent
1 : To send
– 662 –
PROGRAMMING
DATA
DATA
NWA-008845-001 Rev.5.0
32ch1010.fm
DECEMBER/02/2005