Control Panel And Indicators; Error Codes - Digital Projection M-Vision LED+IR series Installation And Quick Start Manual

Digital Projection
M-Vision LED+IR series

Control panel and indicators

Some of the controls from the remote control are duplicated on the projector control panel, as
shown here.
The yellow Standby indicator will light when the projector is in standby. The blue Power
indicator will flash when the projector is cooling down or warming up. It will be steady when
the projector is in normal running mode, as shown in the chart below.

Error codes

If the projector detects an error, the red Issue indicator will flash, as shown in the chart below.
For example, if the fan fails, the red indicator will flash twice followed by a pause, then the
sequence will repeat until the error condition is corrected.
Rev D July 2014
GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide.
Page Inst_4