Setting The Lan Ip Configuration - Digital Projection M-Vision LED+IR series Installation And Quick Start Manual

Digital Projection
M-Vision LED+IR series

Setting the LAN IP configuration

•
Point your browser at the projector by typing its LAN IP Address into the address bar,
then press the Enter key.
•
The embedded IP Configuration webpage should appear.
•
Edit the settings as required, then click on Save.
Rev D July 2014
WIRING DETAILS Connection Guide
Notes
The default LAN IP address is
192.168.0.100
DO NOT change this unless it is
absolutely necessary.
Make sure you make a note of the
new address when you have done
so.
Page Conn_11