A Tour Of The Menus; General Menu; Source Select; Menu Position - Digital Projection M-Vision LED+IR series Installation And Quick Start Manual

Digital Projection
M-Vision LED+IR series

A Tour of the Menus

General Menu

Source Select

•
Select which input source to display.

Menu Position

•
Set this to determine the position of the menus on the screen.

Memory

•
The current image settings can be saved to one of two Presets. Either of the two Presets or the Default settings, can be recalled later.
•
The following settings are saved:
From the Image menu:
Aspect Ratio Brightness
Sharpness Noise Reduction
From the menu:
Advanced
Color Space Video Standard
Color Gamut Brilliant Color
Rev D July 2014
A TOUR OF THE MENUS
Contrast Saturation Tint
Overscan HSG
Gamma Colour Temperature
Adaptive Contrast RGB Offsets
DLP Frame Rate
RGB Gains
Operating Guide
Notes
See also Using the Menus, earlier
in this guide and Menu Map, later in
this guide.
The input source that is currently
selected is highlighted with a
cross .
To use the SCART input, you
will need an adaptor. See the
Connection Guide for more
information.
and can also be
User-1 User-2
recalled using the USER MEMORY
A and B keys on the remote control.
Note: Buttons and on the
C D
remote control are not used.
When is selected,
Save Presets
the image settings for ONLY the
selected input are saved.
Page Op_6