Lightspeed Redcat media User Manual page 30

INITIAL SET-UP:
OPTIONAL IR MEDIA CONNECTOR
1. Turn off the second microphone.
The iR Media Connector uses
the same channel (channel B) as
the optional second microphone
(REDMIKE, LT-71, or REDMIKE
Share). As a result, they cannot be
used simultaneously. If you have
a second microphone, turn it off
before transmitting audio from the
iRMC.
NOTE: If you adjust the CH B
volume on the classroom audio
system, you will also be changing
the volume for your second
microphone. Return the CH B
volume knob to the original
position before turning the second
microphone back on.
2. The iR Media Connector volume
is preset for most standard audio
signals. If you need to turn the
volume up or down, follow this
procedure:
A. Adjust the volume at the
B. If the audio source does not
3. If the first two options do not
30
computer, television, or other
audio source if possible.
have a volume control (such
as many DVD players) adjust
the volume at the iRMC.
give optimum volume level,
the last place to adjust the
volume is the CH. B Volume
on the classroom audio system
(REDCAT Media or other).