Lightspeed Redcat media User Manual page 15

Classroom audio system

Hide thumbs Also See for Redcat media:

Table of Contents

2. AUDIO INTEGRATION

1. Turn the Computer or DVD/VCR

volume on the REDCAT Media all

the way down. REDCAT Media

volume controls push in and lock

to prevent accidental adjustment.

2. Connect a patch cable (not

included) from the audio source

into the Computer or DVD/VCR

input jack on the bottom of the

REDCAT Media.

3. With both the REDCAT Media and

audio source power on, adjust the

corresponding volume control until

the desired level is achieved.

NOTE! Be careful to not to set the

volume too high, as this can distort

the speaker and potentially cause

damage.

CONT'D

Table of Contents

Need help?

Do you have a question about the Redcat media and is the answer not in the manual?