Lightspeed Redcat media User Manual page 20

OUTPUT TO ASSISTIVE LISTENING
DEVICE (ALD)
1. Turn the ALD (Assistive Listening
2. Determine the size and type of
3. Connect a patch cable from the
20
Device) volume control on the
REDMIKE side panel all way the
down.
audio input jack on the device as
many manufacturers' products
differ in connector size and shape.
The Lightspeed LES-370 Personal
FM System requires a 3.5mm to
3.5mm patch cable (part# CA-
MMC3535, not included).
ALD's microphone jack or AUX
input to the 3.5mm audio jack
labeled "ALD OUT" on the side
of the REDCAT Media.
4. Adjust the volume control on the
ALD's receiver to maximum output.
NOTE: This is to set the maximum
allowable signal from
the REDCAT Media.
5. With the REDCAT Media and
ALD turned on, speak into the
REDMIKE and slowly adjust the
ALD
volume control until the
appropriate audio level is
attained in the ALD's receiver
headphones.